"INTEGRATED GATE EX" is a next-generation noise reduction system equipped with a newly developed hum noise filter. For optimal sound quality and latency, it maintains an analog state from input to output without digitizing the input signal.
Because the CPU constantly monitors the input signal, it can perform optimal noise reduction or noise gate operations on the input signal, resulting in a reduction in noise.
This unit can save up to 128 presets. You can fine-tune the settings according to the level of the effects pedals and amplifiers you are using, as well as the characteristics of your instrument.
●The impetus for developing noise reduction The noise picked up by guitar and bass pickups has been a long-standing problem for musicians, recording and PA engineers, and electrical engineers. In recent years, with the spread of computers, LED light bulbs, mobile phones, and wireless devices, the amount of noise picked up by pickups is said to have increased. The type of noise varies depending on the location, from low humming noises to very high-pitched buzzing noises. In severe cases, it can interfere with playing the guitar or bass. Sometimes musicians try to make the noise less noticeable by instantly turning down the volume or using volume pedals and switching systems to mute, but there are limits to how much noise can be handled when dealing with diverse phrases and songs. Free The Tone has received many inquiries about how to reduce noise, especially the noise picked up by pickups on stage, in order to create an environment where musicians can concentrate on their performance.
●Efforts to Reduce Noise There are several ways to reduce noise picked up by pickups, such as using pickups with noise-canceling structures or improving the shielding effect of the guitar or bass itself, but all of these change the sound quality output from the guitar or bass. Also, there is variation in the amount and frequency range of noise reduction, and the effect is limited. In addition, there are cases where high-cut filters are used to make the noise less noticeable, but this changes an important sound quality. At Free The Tone, we considered solutions to reduce noise from various angles and concluded that the best method, both in terms of sound quality and preserving the natural decay of the instrument's sound, is to automatically lower the level of the signal output from the instrument. This means that the action of manually lowering the volume using the guitar's volume control or volume pedal to make the noise less noticeable is performed electrically, automatically and at high speed.
● Hum noise countermeasures
The INTEGRAETED GATE/IG-1N works by setting the threshold level at which noise reduction and noise gateing begin to take effect, thereby minimizing the visibility of noise. Numerous usage examples show that the threshold was set to eliminate hum noise.
Hum noise is a low-frequency range that affects the sound of guitars and basses. Furthermore, because it originates from the power supply frequency (50Hz/60Hz), it contains noise at integer multiples of the power supply frequency. At Free The Tone, we investigated the frequency components of noise using guitars equipped with single-coil pickups, which tend to exhibit noticeable hum noise. As a result, we found that the frequencies at which hum noise is most prominent are 3, 5, and 7 times the power supply frequency (150Hz, 250Hz, and 350Hz in the 50Hz area), where the noise level is high.
To reduce this hum noise, we developed a circuit incorporating three notch filters, with the level of each filter adjustable based on the input signal. Of course, we anticipated use in areas with a 60Hz power supply frequency, and the circuit allows switching between 50Hz and 60Hz operation. Furthermore, if the hum noise level is low and the hum noise filter is unnecessary, it can be turned off.
●In developing the "INTEGRATED GATE EX," which fuses digital and analog, the audio signal line was left in analog form rather than digitized from a sound quality perspective, and high-speed, accurate output level control was achieved using digital circuitry. This is the digitally controlled analog circuit method that Free The Tone excels at. This technology is also used in the IG-1N (INTEGRATED GATE) and PA-1Q series (Programmable Analog 10 Band EQ).
The analog circuit through which the audio signal passes has been meticulously designed and perfected after extensive consideration of sound quality.
●Signal Monitoring Function The noise picked up by the pickup becomes more noticeable as the string vibrations attenuate and the volume decreases. The attenuation of string vibrations is not constant, and there are fluctuations in the string vibrations, so in reality, the sound gradually attenuates while repeatedly increasing and decreasing in volume. This is also the cause of the unnaturalness at the point where the sound cuts off, which was a problem with conventional noise gates. To solve this problem, we developed a signal monitoring function that constantly monitors the input signal with a CPU. By constantly monitoring and analyzing the input waveform and rapidly controlling the optimal output level according to the waveform, we succeeded in achieving natural attenuation.
The "INTEGRATED GATE EX" has two operating modes: noise reduction mode and noise gate mode.
• Noise Reduction Mode: In noise reduction mode, when the volume falls below the set volume level (THRESHOLD value), the noise reduction circuit begins to gradually reduce the volume to make the noise less noticeable. The signal monitoring function provides optimal volume control and achieves natural attenuation. If a signal exceeding the set value is input, the noise reduction circuit immediately allows the signal to pass through unaffected. The INTEGRATED GATE EX allows you to select from five different release times.
• Noise Gate Mode: In Noise Gate Mode, the sound is immediately muted when it falls below the set volume (THRESHOLD value). This is useful when you want to stop the sound instantly during performance. It can be used as a crisp gate effect.
INTEGRATED GATE EX allows you to choose from five different gate closing speeds.
●GATE & FILTER LINK function
When the GATE & FILTER LINK button is turned ON, the hum noise filter is linked to the control of the noise gate and noise reduction. This means that when a guitar or bass signal is input, the hum noise filter also turns OFF, allowing you to use it without compromising sound quality.
Line-level compatibility: The output level from the send of a guitar amplifier's send/return circuit varies considerably depending on the amplifier's settings. To accommodate high-level signals, the maximum input level is supported up to +19.5 dBu.
●Preset Function The amount and characteristics of noise vary greatly depending on the gain settings of the guitar, effects pedals, and amplifier used. This unit is equipped with 128 preset areas so that you can save settings optimized for each piece of equipment and setting. The parameters that can be preset are NOISE GATE / REDUCTION function ON/OFF, HUM NOISE FILTER function ON/OFF, GATE & FILTER LINK function ON/OFF, THRESHOLD, and noise gate/noise reduction mode selection.
Presets 1 through 4 can be instantly recalled using the footswitch on the panel.
●MIDI Function This unit is equipped with MIDI IN and OUT/THRU terminals. You can recall presets and control effects ON/OFF using MIDI signals. This is a very convenient function when using this unit in conjunction with audio routing controllers such as the ARC-4 or ARC-53M. Since there is no need to connect to the effects loop, it can be incorporated into a pedalboard without major wiring changes.
【Features】
• Our unique signal monitoring system constantly monitors the input signal, performing optimal noise reduction operation for that signal.
• Equipped with noise reduction mode and noise gate mode. You can select the operating mode for each preset.
• Equipped with a hum noise filter function. Selectable between 50Hz and 60Hz. Link operation with a noise gate/noise reduction unit is also possible.
- You can recall 128 presets using MIDI signal control.
- Equipped with an input level selector switch (INST/LINE).
It features an HTS (Holistic Tonal Solution) circuit. Unlike conventional buffer circuits, the HTS circuit performs impedance conversion while maximizing the sonic characteristics of the guitar or bass, achieving both "high sound quality" and "low noise." Even when the effect is off, this HTS circuit prevents degradation of the guitar or bass sound quality.
The output signal is output in phase with the input signal, so there is no need to worry about phase inversion.
【specification】
Number of presets: 128
Input impedance: INST 1MΩ / LINE 330kΩ
Output load impedance: 10kΩ or higher. Maximum input level: +19.5dBu (INST/LINE)
Controls: PARAMETER encoder, power frequency selector switch (50Hz/60Hz), INST (-10dB)/LINE (+4dB) level selector switch. Terminals: 2 x 1/4-inch standard phone jacks (input, output), DC 9V input jack (for AC adapter connection), 2 x DIN 5-pin connectors (MIDI IN, OUT/THRU).
Power supply: DC 9V (center negative) AC adapter (FA-W0905D-JA, FA-0905D-JA: sold separately)
Current consumption: 230mA
Dimensions: 120(W) x 102.3(D) x 58.5(H) mm (including protrusions such as footswitch and jack)
Weight: Approximately 340g (excluding accessories)
Accessories: Warranty card, website access card, safety instructions, rubber feet x 4
Optional accessories: AC adapter FA-W0905D-JA, FA-0905D-JA