DSM & HUMBOLDT ELECTRONICS SIMPLIFIER MkII [analog amp simulation]

The Simplifier MK-II recreates the behavior from preamp to cabinet while retaining the instant touch and dynamics that only analog devices can provide.

■ Preamp - The AC BRIT preamp minimizes the MID control range, providing more accurate historical behavior, like the VOX AC-30 64' top boost channel.
-The American (USA) preamp is based on the Bassman 59', a true classic amplifier.
- MS Brit delivers new levels of gain, like a hot-rodded Marshall Plexi.

■ Power Amp - A new dedicated power amp drive lets you set the perfect amount of power amp compression for that sweet spot that only tube amps can achieve. This control delivers a new level of realism that only DSM Humboldt can deliver.
POWER AMP is a highly detailed recreation of a Class A/B power stage, including the phase inverter. Each power type reconstructs the feedback path, PI gain, and the effect of the power transformer on the power tubes.
Clip indicator shows when the emulated power tubes are clipping, helping you find the desired sweet spot between power drive and preamp drive, just like a real tube amplifier.
Combined with MASTER VOLUME, you can get any amount of preamp and power amp drive at any volume level.

■ Master Section - MASTER VOLUME allows you to set the amount of drive for the preamp and power amp at any volume level, avoiding unwanted FX-LOOP distortion.
Redesigned PRESENCE control in the power amp feedback: Turning it clockwise boosts the high-mids like a Marshall or Fender. Turning it counterclockwise cuts the highs like a VOX amp.
- The redesigned RESONANCE control now allows you to set the bass thump to suit your PA system.

■ Stereo Cabinet Simulator: After comprehensive research based on hundreds of response curves of the most famous speakers on the market, the cab sim section has been completely redesigned and the MIC position control has been replaced with a more convenient and intuitive three profile speaker control.
Black: V30 speaker base Blue: Blue Alnico speaker base Green: G12 Greenback speaker base

3 classic cab types:
Combo (1x12 inch Blackface style cab)
Twin (2x12-inch AC-style cabs)
Stack (4x12 inch 1960 style cab)

■ Reverb According to many users, one of the most desired features of the Simplifier was a built-in reverb, or room control.
So, in response to this request, we've included a new reverb in Simplifier with a sidechained digital PLATE reverb.

Spec
Dimensions: 120 x 70 x 45 mm
Weight: 360g

[Power requirements]
Voltage: 9 to 12V DC
Connector: 2.1mm DC jack, center negative Current draw: 150mA
Recommended supply current: 200mA or more

[Output impedance]
Input: Input: 1MΩ
L and R RETURN inputs: 1M Ω
SEND output: 1K ohms Unbalanced output: 4.7K ohms
Balanced output: 100 Ω

[Headphone amplifier specifications]
Power: 135mW at 32 Ω
* For use with 16, 32, 64, and 96 ohm headphones.
*High impedance headphones may cause power loss.