Acoustic Revive GB-TripleC-FM (SS 3m)

An amazing cable that will amaze you with its quality.

1. Wide range: "The clarity and clarity from the midrange to the high range is excellent, and the surprisingly rich deep bass comes forward without any lag and is very crisp."
As Tsuyoshi Kon commented on the manufacturer's official website, there is no sense of loss of bandwidth, and no sense of "lack." The tone is so vivid it's like peeling back a layer of skin.
There is no excessive sharpness that is typical of high-fidelity cables, but rather a purely acoustic richness.
One particularly noteworthy point is the speed of the low-frequency response, which is almost the same as the high-frequency response.

2. Thorough noise prevention: The wire is designed to completely prevent any interference that may hinder the signal flow and amount of information, and to eliminate any interference that may occur.
By passing "Finemet beads," a soft magnetic noise-eliminating material, through the wire when connecting the plug and wire internally, it is possible to eliminate noise during transmission in the audio system.
In addition to its unique, top-notch transmission characteristics, this cable also eliminates noise during transmission, making it truly worthy of being called absolute.

There is no other cable that offers such excellent noise suppression and the resulting transmission power.
We promise to deliver an ultra-high S/N ratio, ultra-wide range, accurate phase characteristics, and organic, vivid tone and texture.



■PC-TripleC conductor The cable conductor uses PC-TripleC, the world's first conductor specifically for audio, made by a forged process, as a single-wire conductor.
PC-Triplec conductors are new conductors that boast the world's best conductivity characteristics, achieved through a forging process that creates high density and ensures that the crystal orientation is continuous in the horizontal direction along which electricity flows.
ACOUSTIC REVIVE uses PC-TripleC as a solid-wire conductor. Since solid wire does not generate stray currents like regular twisted-wire conductors, it enables pure and accurate transmission without distortion or impurities.

*What is the significance of single track?
Most cables currently on the market use twisted wires made from fine wires twisted together.
The reason why twisted wire was used is simply because it is easy to handle.
It has been used for a long time because it is easy for users to use and easy for manufacturers to manufacture.
However, with such twisted wire, stray currents, known as strand jumping, cannot be avoided, as they jump between the twisted wires.
Stray currents that fly around using air or insulating materials as dielectrics cannot be prevented even if each wire is insulated and a Litz wire structure is used.
This stray current causes extraneous sounds, noise, and distortion, making the sound muddier than you might imagine.
The only way to eliminate stray currents is to use a single wire.


■Teflon insulation The insulation material is made of Teflon, which has a low dielectric constant. The dielectric constant is a value that indicates the ability to stop the flow of electricity.
The dielectric constant of PVC, which is normally used as an insulating material for guitar shields, is a high value of 5.6.
Teflon's dielectric constant is 2.2, less than half that of other materials, which dramatically improves transmission speed and allows even the most delicate nuances to be transmitted directly.


■Natural silk buffer material & tourmaline-impregnated sheath The buffer material and outer sheath contain natural silk and natural mineral tourmaline powder, preventing the generation of static electricity and achieving a glossy, fresh tone and texture.
Natural silk effectively avoids the effects of vibration and prevents the generation of static electricity, without adversely affecting the excellent transmission characteristics of the wire.
Natural silk itself is difficult to charge and prevents static electricity from occurring, but this effect is not limited to that. Even if it does become charged, it will be charged with a positive (+) potential.
When combined with a resin insulating material that is negatively charged, it has the effect of canceling out static electricity.


■Two-core shielded structure In order to make the most of these excellent materials, the GB-TripleC-FM cable itself uses a two-core shielded structure rather than a single-core coaxial structure.
The single-core coaxial structure used in regular guitar shields has different shapes for the hot (+) and cold (-) conductors, which causes phase distortion.
Furthermore, since the cold side also serves as a shield, it is easily affected by external noise.
In contrast, the two-core shielded structure achieves extremely accurate phase characteristics because the hot and cold wires are the same shape, and an independent shield is provided around the conductors,
This makes it possible to effectively shut out external noise.


■Completely non-magnetic vibration-resistant phone jack and high-quality solder No matter how good the cable you use, if the phone jack performance is poor, everything will be ruined.
A normal phone jack has an iron core embedded inside, which can become magnetized and cause the sound to become distorted and muddy.
The GB-TripleC-FM phone jack is completely non-magnetic, carved from solid brass, so it is not affected by magnetism.
The surface is finished with a high-quality gold plating that will not oxidize even after long-term use.
In addition, by using aviation-grade aluminum alloy for the cover, a vibration-damping effect is created by the dissimilar metals, which helps prevent deterioration of sound quality due to vibrations at high volume.
The solder used is a high-quality lead-free solder that combines gold and silver, maximizing conductivity.


■Noise reduction effect with FINEMET
What makes the GB-TripleC-FM revolutionary is that it is the world's first noise-canceling guitar shield.
Transmission noise travels between instruments such as guitars, basses, electric pianos, and keyboards and amplifiers and other equipment, degrading the S/N ratio and significantly impairing sound clarity.
The GS-1.0TripleC-FM uses FINEMET, a new generation noise-eliminating material developed by Hitachi Metals, in the guitar shield, making it possible to absorb and eliminate transmission noise.
The completely noiseless environment allows you to experience the true sound of your instrument like you've never heard it before.


*In addition to SS and LS, SL and LL are also available. The price will not change if you order 3m. Please contact us.