{"product_id":"842291","title":"OLLO AUDIO [Limited Quantity R1 Pre-Order Special Edition 2026 EX] R1 (Auro Audio) (Closed-back headphones) (Sound Engineer\/Recording Headphones) (Mixing\/Mastering) (Monitor Headphones)","description":"★OLLO Audio \"R1 Pre-order Special Edition 2026\" Pre-order Now Open for Orders\u003cbr\u003e\u003cbr\u003e OLLO Audio's latest recording headphones, the \"R1,\" will be available in Japan starting in February 2026. Starting November 1st, we will begin accepting orders for the \"R1 Pre-order Special Edition 2026,\" which allows you to purchase the initial batch at a discounted price.\u003cbr\u003e\u003cbr\u003e ==\u003cbr\u003e\u003cbr\u003e [Product Features]\u003cbr\u003e\u003cbr\u003e ★One year after the release of the best-selling mixing headphones \"X1,\" which achieved the flattest sound in headphone history and thrilled top professionals worldwide, OLLO Audio's closed-back recording headphones are back. OLLO Audio, which has perfected mixing headphones, has reimagined recording headphones that feature a \"U-shaped frequency response\" pushed further based on \"flat response,\" offering \"immersion\" that allows you to get more into the music and bring out superior performance, and \"isolation\" that brings silence to the recording booth. Based on the most mature perspective of the 21st century, more than a quarter of a century later, the \"R1\" recording headphones not only provide a sound design appropriate for the application, but also possess the appeal of an inspiring item that enhances the value of the studio.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e ●A GOOD MIX STARTS IN THE RECORDING ROOM\u003cbr\u003e (A great mix starts in the recording room.)\u003cbr\u003e\u003cbr\u003e Serious issues you'll face before you even start mixing, such as \"takes with lingering clicks\" or \"takes with lackluster performances,\" caused by low-occlusion\/narrow-frequency recording headphones. We offer a new solution to this costly problem.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e ●Ambient bleed\/music isolation\u003cbr\u003e (Reduces ambient noise intrusion and sound leakage)\u003cbr\u003e\u003cbr\u003e The closed-back design prevents sound leakage from the headphones, keeping any recording environment clean.\u003cbr\u003e With a -10dBSPL* noise reduction capability, it reduces external noise by 50%!\u003cbr\u003e\u003cbr\u003e *What does -10dB SPL sound insulation performance mean?\u003cbr\u003e A difference of 10 dB SPL is equivalent to doubling the perceived volume. In other words, -10 dB SPL noise reduction cuts the perceived volume of music or noise from the environment that reaches the headphone earcups by half.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e ●Pilot track\/foldback and click isolation\u003cbr\u003e (Isolation of guide track sound\/monitor feedback sound and click sound)\u003cbr\u003e\u003cbr\u003e When artists require high volume levels for headphone monitoring to feel the groove, it's difficult to block out sound leakage from backing tracks and clicks that get picked up by the recording microphone. The \"R1\" isolation isolates elements such as clicks and percussion sounds from the microphone as much as possible.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e ●U-shaped sound for punchy kicks and clear melodies\u003cbr\u003e (A U-shaped sound that delivers punchy kicks and clear melodies)\u003cbr\u003e\u003cbr\u003e In reality, while a flat response is essential in mixing sessions, its objectivity can ruin the atmosphere during recording sessions. The \"R1\" employs a U-shaped frequency response with clear bass and treble that immerses artists and allows them to groove without hesitation. Musicians will leave your studio with perfect takes and smiles on their faces.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e ●Comfort for long sessions\u003cbr\u003e Comfort for long sessions\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e The primary element of comfort is ear pads large enough to completely enclose the ears. The swivel and tilt function of the cups is the next most important element, and the self-adjusting headband provides stress-free operation and a seamless fit for any head shape.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e ●DURABILITY\u003cbr\u003e Robustness against outlaws who visit the studio and don't respect you and your gear.\u003cbr\u003e\u003cbr\u003e ●DURABLE BY DESIGN\u003cbr\u003e Product design consisting of American walnut, stainless steel, artificial leather, and silicone.\u003cbr\u003e\u003cbr\u003e ●SERVICEABLE WITH HOME TOOLS\u003cbr\u003e Service parts that can be replaced with household tools and are supplied sustainably for long-term operation.\u003cbr\u003e\u003cbr\u003e ● Easy Maintenance\u003cbr\u003e R1 consumable parts that are easy to replace and do not require special skills.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e ●FEATURES\u003cbr\u003e • U-shaped frequency response for a highly immersive experience of the groove during performance • 50% reduction in ambient noise intrusion and sound leakage (-10dBSPL*) • Comfortable for extended wear • Replaceable components to support long-term use\u003cbr\u003e\u003cbr\u003e ●Main uses: Vocal recording, instrument recording, field recording, podcasts, audio-visual content creation, sound design, etc.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e [Product Specifications]\u003cbr\u003e\u003cbr\u003e • Style: Closed-back, over-ear • Frequency response: 5 Hz – 22 kHz sweep, 1\/3 octave pp range, 13.4 dBSPL ±1dB\u003cbr\u003e • SPL\/Sensitivity: 110 dBSPL @ 1kHz RMS3dB @ 0 dBu\u003cbr\u003e • Impedance: Approximately 32 ohms - Compatible with all devices • Speaker type and size: Dynamic, 50mm\u003cbr\u003e • Magnet type: Neodymium magnet • Membrane\/Composite: PU+PET patented pattern • THD \u0026amp; 2nd: 0.12% \u0026amp; 0.05% @ 94 dB SPL @ 1 kHz\u003cbr\u003e • Ear pad diameter (inner diameter\/outer diameter): 60mm\/100mm\u003cbr\u003e • Ear pad material: Acoustic foam with artificial leather • Ear cup material: American walnut • Headband material: Stainless steel and silicone • Cable connector: Detachable 2m Y-type mini XLR\u003cbr\u003e • Connector: 3.5mm jack (6.3mm jack adapter included)\u003cbr\u003e • Calibration: Unit-specific calibration not supported • Weight (excluding cable): 386 g (0.8 lb)\u003cbr\u003e Domestic warranty: 1 year (cable warranty: 3 months)\u003cbr\u003e\u003cbr\u003e ●Speaker: Dynamic speaker (neodymium magnet) \/ 50mm diameter, patented pattern composite PU+PET diaphragm \/ 32 ohms \/ 110dB SPL at 1kHz, RMS 3dB @ 0 dBu, 1 ohm output - enabling operation with smart devices \/ Symmetrical design (±1dB SPL tolerance, sweep, 100Hz-10kHz bandwidth at a distance of 1cm in free space)\u003cbr\u003e\u003cbr\u003e ● Acoustic ear pads with an outer diameter of 100mm (3.8 inches), an inner diameter of 60mm (2.3 inches), a depth of 25mm (0.8 inches), and ±2.5mm. Made of artificial leather \/ THD \u0026amp; 2nd: 0.12% \u0026amp; 0.05% @ 94 dB SPL @ 1kHz (when using a sweep signal source) * Measured using an IEC 60318-1 compliant ear simulator \/ Frequency response variation: 5 Hz to 22 kHz band, 1\/3 octave bandwidth, 13.4 dBSPL (±1dB), using a sweep signal and IEC 60318-1 ear simulator \/ Pressure balance control: Saati flow resistor 3.2Ω\/1cm used \/ Bidirectional noise isolation performance measured with an IEC60318-1 ear simulator using pink noise as the sound source: -10dBSPL(c).\u003cbr\u003e\u003cbr\u003e ● Headband\u003cbr\u003e The clamping force is set to achieve the target frequency response with an industry-standard 14.3cm (KEMAR) two-point diameter in the IEC60318-4 ear simulator. The artificial leather strap and powder-coated stainless steel spring steel are replaceable with household tools. The self-adjusting strap allows for quick and easy adjustment of head size.\u003cbr\u003e\u003cbr\u003e ● Detachable silicone cable with a length of 2m (6.5 feet) - Features enamel-coated OFC core wires to minimize signal distortion and ensure long lifespan \/ Includes a 3.5mm to 6.3mm jack adapter (1\/8 inch to 1\/4 inch) for device connection \/ Dual mini XLR connectors for left and right channels\u003cbr\u003e\u003cbr\u003e ●This feature is not available with USC II calibration recording headphones. (Calibration is included with the X1 mixing headphones.)\u003cbr\u003e\u003cbr\u003e ● Shielding performance Product classification: EN60268-7-IEC-DCSC-32R2, Circumaural closed-back dynamic headphones External noise or music isolation (by frequency band): 5dBSPL(c)@250Hz, 11dBSPL(c)@500Hz, 13dBSPL(c)@1kHz, 25dBSPL(c)@3kHz, 30+dBSPL(c)@6kHz\u003cbr\u003e External noise or music isolation performance across the entire frequency band (average value): ~10 dBSPL(c); perceived volume is approximately halved. Data acquisition standard: EN 60268-7 compliant (IEC 60318-1), sweep signal, output 1Ω, 100Hz-10kHz, tolerance ±1dB\u003cbr\u003e Signal source and settings: Pink noise full bandwidth 20Hz-20kHz, 90-degree angle - directly into the ear in accordance with IEC60318-1, calibrated to 80dBSPL(c).\u003cbr\u003e\u003cbr\u003e *As this is professional recording equipment, there is no warranty on the product box. Also, the product box is a shipping box, not a retail box. Therefore, please understand that damage to the box may occur during shipping.\u003cbr\u003e\u003cbr\u003e *Please note that the ear cups made from American walnut wood will have individual variations in color and knots, which are inherent characteristics of wood. We are unable to accept requests for specific wood grain patterns or exchanges based on the appearance of the wood grain.","brand":"OLLO AUDIO","offers":[{"title":"Default Title","offer_id":43502969323633,"sku":"842291","price":480.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0638\/4173\/0673\/files\/842291_01.jpg?v=1782124924","url":"https:\/\/global.ikebe-gakki.com\/zh-hans\/products\/842291","provider":"Ikebe Musical Instruments Store","version":"1.0","type":"link"}