{"product_id":"483041","title":"KRK V4 S4 (pair)","description":"Features:\u003cbr\u003e\u003cbr\u003e - The tweeter has been replaced with a new Kevlar tweeter, similar to the woofer section, instead of the silk dome used in the VXT series.\u003cbr\u003e\u003cbr\u003e - The amplifier is equipped with a powerful \"Class D\" digital amplifier with a total output of 85 watts.\u003cbr\u003e\u003cbr\u003e - The front uses an aluminum frame to control excess vibration, and by attaching the included mesh grill, you can carry it to the site with confidence.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e V series\u003cbr\u003e - The newly developed woofer features a lightweight unit and a small, powerful amplifier to reproduce extended bass with reduced distortion.\u003cbr\u003e Kevlar® is an incredible fiber, so good it's even used in bulletproof vests. KRK has discovered that this material is also ideal for disrupting standing waves, which cause distortion and coloration. Impregnated with a hardening resin to seal the fibers and coated with a polymer for enhanced damping, the Kevlar® cone maintains a continuous polar pattern at all frequencies, superior to any other cone material. The result is a sound with minimal delay or blurring, resulting in clean, precise bass.\u003cbr\u003e\u003cbr\u003e Music is all about subtlety. The brush of a brush across a cymbal, the scrape of a pick across a guitar string, and even the atmosphere of the room in which the performance takes place all add a sense of life to the music. To reproduce these subtle nuances, we've upgraded the tweeter design. All V Series 4 models are equipped with Kevlar R cone tweeters. The result is stunningly clear and beautiful high frequencies.\u003cbr\u003e\u003cbr\u003e Minimizing vibration requires the most rigid components possible. The V Series 4 features a solid aluminum baffle that is less susceptible to cabinet vibration. The result is razor-sharp reproduction of sonic detail, a deeper level of insight into the performance, and a precise, wide sweet spot for the engineer to mix.\u003cbr\u003e\u003cbr\u003e - 49 different combinations of low and high control functions allow you to compensate for acoustic characteristics and achieve more accurate monitoring.\u003cbr\u003e\u003cbr\u003e・All V Series 4 models come with a grille. Special tools are required for installation.\u003cbr\u003e\u003cbr\u003e SYSTEM SETTINGS\u003cbr\u003e\u003cbr\u003e A - GROUNDLIFT (1 LIFT \/ 2 GROUND) - Switch to connect or disconnect pin 1 to ground\u003cbr\u003e\u003cbr\u003e B - INPUT (1 -10dBV \/ 2 +4dBu) - Input sensitivity selector switch, -10dBu: consumer standard, +4dBu: professional standard\u003cbr\u003e\u003cbr\u003e C - STANDBY (1 ON \/ 2 OFF) - When set to ON, the unit will go into sleep mode if no audio signal is detected for 30 minutes. It will restart when a signal is sent.\u003cbr\u003e\u003cbr\u003e D - LOGO LED (1 ON \/ 2 OFF) - Turns the backlight of the KRK logo on the front on or off.\u003cbr\u003e\u003cbr\u003e E - LOGO LED DIM (1 BRIGHT \/ 2 DIM) - Allows you to adjust the brightness of the KRK logo when it is on.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e KRK V4 S4 Technical Specifications\u003cbr\u003e\u003cbr\u003e Configuration: 2-Way\u003cbr\u003e\u003cbr\u003e System type: Active Studio Monitor\u003cbr\u003e\u003cbr\u003e Low-Frequency: Woofer, 4 cast aluminum frame, Kevlar cone, ferrite magnet\u003cbr\u003e\u003cbr\u003e High-Frequency: Tweeter, 1, Kevlar dome, ferrite magnet\u003cbr\u003e\u003cbr\u003e Frequency Response: 58Hz - 19kHz\u003cbr\u003e\u003cbr\u003e Frequency Range: 50Hz - 24kHz\u003cbr\u003e\u003cbr\u003e Max Peak SPL: 110 dBSPL\u003cbr\u003e\u003cbr\u003e Power Output: LF (55 Watts), HF (30 Watts), Total (85 Watts)\u003cbr\u003e\u003cbr\u003e High Control: H1 (High Shelf -2dB 10kHz, H2 (High Shelf -1dB 10kHz \/ High Mid Peq -1dB 3.5kHz), H3 (High Mid Peq -1dB 3.5kHz), H4 (Flat), H5 (High Mid Peq +1dB 3.5kHz), H6 (High Shelf +1dB 10kHz \/ High Mid Peq +1dB 3.5kHz, H7 (High Shelf +2dB 10kHz)\u003cbr\u003e\u003cbr\u003e Low Control: L1 (Low Shelf -3dB 75Hz), L2 (Low Shelf -1.5dB 75Hz), L3 (Low Shelf -2dB 75Hz \/ Low Mid Peq -2dB 200Hz), L4 (Flat), L5 (Low Mid Peq -2dB 200Hz), L6 (Low Shelf +1.5dB 75Hz), L7 (Low Shelf +3dB 75Hz)\u003cbr\u003e\u003cbr\u003e Enclosure Construction: MDF \/ Aluminum\u003cbr\u003e\u003cbr\u003e Grille:Included\u003cbr\u003e\u003cbr\u003e Dimensions (H x W x D): 10.08 (256mm) x 6.54 (166mm) x 8.58 (218mm)\u003cbr\u003e\u003cbr\u003e Weight: 12.78 lbs. (5.8 kg)\u003cbr\u003e","brand":"KRK","offers":[{"title":"Default Title","offer_id":42492270706801,"sku":"483041","price":929.77,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0638\/4173\/0673\/files\/V4_S4__pair__01.jpg?v=1759425524","url":"https:\/\/global.ikebe-gakki.com\/zh-hans\/products\/483041","provider":"Ikebe Musical Instruments Store","version":"1.0","type":"link"}